This is my Design Hidden Hitch
It is mounted to the rear of the 350z and is a vertical hitch mount utilizing a typical hitch pin.
The reciever as shown above is a L-shapped receiver that then connects to the ball mount of your choice (ball mount not included).
Comes with all mounting hardware and fish wire tools needed for installation.
The rear bumper facia can either be trimmed 1" x 1" or ONLY when the L shapped receiver is connected will it be making contact.
Will work with bumper tuck mod!
However the rear bumper center WILL need to be cut for sure 1.0" x 2.0" to make room for the hitch vertical mount.
See notched out section as shown below!
$250 hitch mount and L-shaped receiver.
Now, this may seem simple, but it does take a good amount of time to custom fabricate.
To include: obtain receivers, steel, machine shop punch holes, Trip to welder, trip to powder coater, mounting hardware (nuts and bolts),
fish wire tool for installation. ALL included with this custom hitch design.
Due to this extensive work load in fabrication please email me for a more exact lead time.
Usually my fabrication schedule allows for shipping within 8-10 days from date of purchase.